Scout Hut Granwood Floor Sanding Ipswich Essex
Project Description: Granwood floor sanding and re-seal using Granguard lacquer
To make sure the floor was treated with a Granwood approved finish we were asked to complete a full sand and re-seal of this Granwood floor. As Granwood is very porous, a well working dust extraction unit is essential to ensure the fine dust doesn’t fill the room within minutes. We use a Bona DCS 70 which is a portable system with a two-step cyclonic separation and unique filter. Heavy dust particles are moved to the large bag, medium dust goes to the coarse filter, while very fine dust goes into the HEPA filter. As per the manufacturer’s data this whole system removes environmental dust by 99.996% which negates the need for lengthy clean-up’s post finishing. The floor was sanded with a Bona belt sander to accommodate and maximise the DCS output. Edges were sanded with our trusty Bona Edge XL again with the DCS attached. Once we were happy with the finish the floor was buffed to ensure uniformity before thoroughly vacuuming the Granwood floor. Using a heavy weight t-bar padco we applied a total of three coats of Granguard with appropriate drying times in between.
This Granwood floor is now treated properly, looks clean and is well protected for years to come.
“Our scout hut hall floor is now looking like new after Conrads efforts. All his work was carried out as promised with no mess and his price was very competitive. We will be using Conrads services again in the future and would be happy to recommend. Thanks, Jonathan.”