Junckers Wooden Floor Sanding Shouldham Norfolk
We were asked to complete a full sand and re-finish of this lovely Junckers floor.
This Junckers floor had become grey, scratched and in some areas cupped due to standard wear and tear over several years. We were asked to complete a full sand and re-seal using Junckers products from start to finish. As there was no requirement for the badminton lines we were asked not to re-paint them. In most cases even though the coloured paint is removed there is always a slight possibility that a shadow will remain. Due to the appearance of the floor we started sanding on a 36 grit belt, finishing on a 100 grit belt. The edges were finished to the same grit. To ensure the floor was smooth, it was abraded with a 120/150 grit mesh screen disc. After a thorough vacuum and tack mop the floor was ready for one coat of Junckers Baseprime solvent/alcohol based primer. Once the primer was fully dry the final three coats of Junckers HP Commercial water based polyurethane lacquer were applied using a T-Bar and padco sleeve.